How to clean floors after moving

　　First: remove waste and sweep away dust.

　　No matter what kind of floor material it is, before cleaning, you must first pick up foreign objects such as toys and buttons, and then use a broom, vacuum cleaner, dust removal paper or mop to remove dust, hair, and cobwebs from the floor surface, under furniture, and corners, especially the entrances and doorways leading to the outside of the house, because most of the dirt and dust come from here.

　　Second: Cleaning of ordinary floors.

　　Choose different cleaners according to different floor materials. Before use, pour an appropriate amount of floor cleaner into a container and dilute it according to the degree of dirt, and then use a mop or rag to drag it from the room to the door. If it is a corner or floor seam that is difficult to clean, you can use an old toothbrush directly dipped in floor cleaner to scrub away the stubborn dirt that is difficult to remove. You can also directly pour the floor cleaner onto a rag, wipe it, and then rinse it with water. However, some floor cleaners contain a high concentration of surfactants. After mopping, the semi-wet floor is more likely to be contaminated with dust. As a result, it becomes dirtier and dirtier. Therefore, special attention should be paid to choosing products with a good reputation. If you want the terrazzo or marble floor to have a shiny effect after cleaning, you may wish to use a floor cleaning polish with a water wax formula, and just let it air dry after use.

　　Third: Cleaning and maintenance of wooden floors.

　　It is forbidden to wipe directly with a wet mop. It is best to use a special cleaner for wooden floors to clean it, so that the floor can maintain its original moist texture and natural color, and can prevent the board from drying out. Note that in order to prevent excessive moisture from penetrating into the inner layer of the wooden floor and causing mold and rot, the mop should be wrung out as much as possible when using floor cleaners. If the surface has not been polished and is not suitable for contact with water, it is best to try it in an inconspicuous place and make sure there is no problem before using it on a large area. If you want to prevent the floor from long-term wear and tear and keep it shiny, you can apply a layer of wood floor wax maintenance agent after cleaning the floor. However, please note that you must wait until the floor is completely dry before applying wax to prevent the wax layer from fully adhering to the wooden floor. Instead, little white spots appear on the floor. And it is best to use a flat sponge mop to avoid the lint from ordinary mops remaining on the floor.

　　Fourth: Carpet cleaning and maintenance.

　　Even if the carpet is regularly vacuumed, it will easily accumulate dirt or floor lice due to long-term trampling, liquid splashing and humid climate. At this time, carpet cleaners can be used for cleaning and maintenance. Before use, it is best to open the windows to avoid the smell of the cleaning agent remaining in the house. Basically, using carpet cleaner is very convenient, just spray the cleaner on the surface of the carpet. But be sure not to get it too wet, lest you wet the backing, which makes the carpet difficult to dry and prone to fading. After the dirt is separated from the carpet surface, a little bit of white cotton wool will appear on the carpet. You can then use a normal vacuum cleaner to remove the separation. There is no need to clean it with water. If you want to use clean water to remove residual oil stains, be sure to use cold water, because warm water will only expand the stain, which is self-defeating. If the carpet's pile has been flattened by furniture, you can use the edge of a coin to slowly lift it up before washing, or fold a wet towel twice and cover the flattened area. Then, use a slightly hot iron to slowly steam the flattened pile to make it stand up.